San Jose Iturbide Engineering - Hardware Job Listings

Indeed

System Engineer

Main Responsibility: Under general supervision, the System Engineer applies principles and techniques of electrical engineering to research, develop and design electrical control systems for floor maintenance equipment. General tasks include embedded control system design and development, wire harness design, printed circuit board (PCB) design, and membrane switch design. Other tasks include the specification of test procedures for components and assemblies for the purpose of evaluating the performance and reliability of prototype and production models. In addition, troubleshooting support for manufacturing or technical service may be required occasionally. Key Responsibilities:* Assist in the development of functional specifications for floor cleaning equipment. * Create or assist with the development of schedules, work plans and priorities for the electrical system projects * Defines electromechanical device specifications and makes decisions on component selection * Develop detailed system requirement documentation for control system hardware and software * Assist in the development of detailed test requirements and test plans for the control systems to carry out functional, operational, and reliability testing * Assist with failure analysis of control system components/assemblies for in\-line or field failures. * Assist with Electromagnetic Compatibility (EMC) testing and approvals * Author Engineering Change Notice (ECN) for electrical systems revisions * Create various documentation and/or reports for development projects to support other departments such as marketing, service, technical publications, and manufacturing * Write technical reports and develops charts, graphs, flowcharts, and schematics to describe and illustrate system’s operating characteristics, malfunctions, deviations from design specifications * Prioritize tasks for the efficient completion of assigned duties. * May give work direction to technicians. * Control system development will typically be a mixture of in\-house activities in conjunction with external engineering resources. Specific design duties may include (but are not limited to: * Electronic and/or electromechanical component specification and selection. * Control circuit design and schematic capture. * PCB design and layout. * Control system assembly design and layout. * Microcontroller programming in C, C\+\+ and/or Python language. * Programming documentation using flowcharts. * Membrane switch design. * Wiring harness and/or cabling specification and design. Education \& Experience:* Bachelor’s degree in electrical engineering * 4 to 8 years experience in electrical and electronic system design Qualifications \& Skills: Working knowledge of electrical motors and controls, electronic circuit function and design (analog, digital, \& micro\-controllers), battery and charger application, electrical\-hydraulic controls, electric and engine powered commercial and industrial vehicles. Ability to program embedded control systems in C, C\+\+ and python languages. Ability to use various embedded control development tools. Knowledge of Freescale, Atmel and ST Micro microcontrollers is desirable. Working knowledge of electrical and electronic test equipment such as multimeters, oscilloscopes, data loggers, etc. Working knowledge of mechanical systems and hydraulic systems is desireable. General knowledge of manufacturing and plant assembly operation processes. Strong organizational skills with an ability to establish priorities and carry out objectives with general supervision Strong technical writing skills. Strong oral communication skills. Ability to work cooperatively with others in a team environment. Let’s create a cleaner future together Cleaning has emerged as a key contributor to health and safety, sparked by technology and innovation. At Nilfisk we are a driving force in this development. Being part of Nilfisk means thinking outside of the box, bringing your inspiring ideas to life, sharing the results, and learning from your setbacks. We believe that diversity is our greatest strength – as we achieve the best results from a wide variety of views and approaches. At Nilfisk, you have the freedom to be yourself and express your opinions. Nilfisk is firmly committed to growth and sustainability in everything we do. You will be empowered in your role as you collaborate with passionate colleagues on a quest to create a cleaner future. Are you ready to make a change for a cleaner future? We embrace diversity and equality with an environment of inclusion. We encourage everyone to apply for the position, regardless of origin, race, ethnicity, religion, physical or mental ability, gender, gender\-identity or expression, sexual orientation, and age.

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary

Complex Logic Hardware - Lead Engineer64318899201667121

Indeed

Complex Logic Hardware - Lead Engineer

**Job Description Summary** =========================== Why this role Impact: Your designs power mission\-critical aerospace systems—your decisions directly influence customer outcomes. Growth: Lead initiatives, mentor others, and expand into value stream and model line efforts that accelerate your development. Collaboration: Work across disciplines to build high\-reliability products at scale. Continuous improvement: Shape standards and tooling that raise the bar for how we deliver.**Job Description** =================== **Roles and Responsibilities** * Lead custom logic development and validation for NPIs (ASIC/FPGA/CPLD) from concept through architecture, RTL, verification, and qualification, ensuring requirements flow\-down and readiness for release. * Define and maintain standard work for NPI phases; drive clear entry/exit criteria, design reviews, and issue closure to meet Safety, Quality, Delivery, and Cost targets. * Structure and solve complex design and test challenges using experiments, data, and cross\-functional inputs; propose creative solutions outside set parameters when needed. * Coordinate tightly with systems, firmware, test, and reliability teams to de\-risk interfaces, timing, and functional performance; manage risks with action plans and rapid learn–iterate cycles. * Mentor early\-career engineers; lead small\-to\-medium NPI projects, facilitating stakeholder alignment and presenting tradeoffs and recommendations with clarity and candor. **Required Qualifications** * Bachelor’s degree in Electrical Engineering or Computer Engineering from an accredited university. * Professional experience in Custom Logic design, development and validation. * Experience using electronic schematic diagrams * Strong problem\-solving skills; ability to structure issues, run experiments, and sustain improvements. * Familiarity with reliability, qualification, and production test flows; comfort working with internal and external partners (foundry, OSAT, vendors). * Experience with FPGA development and hardware design languages * Experience with verification methods and testbench development such as VHDL, SystemVerilog, UVM, etc. * Clear communication, stakeholder facilitation, and an inclusive, team\-first mindset. **Desired Characteristics** * Experience with high density custom logic designs, FPGA, System on Chip technologies * Experience requirements\-based designs, high\-reliability, safe\-by\-design, design/development methods, DO\-254 is a plus * Experience with contemporary data transfer/communication standards: PCIe, PCI, 10/100/1000\-BaseT * Experience with aviation data transfer/communication standards: ARINC 664, MIL\-STD\-1553, TSN. * Exposure to value stream mapping, daily management, and root\-cause problem solving. * Work in variety of development team sizes * Independent, clear\-thinking, problem solving ### **Note:****We may not have a specific job for you today, but are interested in your expertise for tomorrow. We’re looking for experienced people, and we offer opportunities around the globe in Engineering.** **Additional Information** ========================== **Relocation Assistance Provided:** No

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary

Indeed

System Architect

Valeo is a tech global company, designing breakthrough solutions to reinvent the mobility. We are an automotive supplier partner to automakers and new mobility actors worldwide. Our vision? Invent a greener and more secured mobility, thanks to solutions focusing on intuitive driving and reducing CO2 emissions. We are leader on our businesses, and recognized as one of the largest global innovative companies. **Define the (system \- mechanical \- software \- hardware …) architecture of the product** * Define Engineering discipline Structure of product and its components in line with platform configurator * Ensure an optimize design to cost approach * Check patent * Identify and support management of technical risks of the Engineering discipline architectures in projects * Propose constant improvement in relation with platform **Secure the product robustness, apply standards** * Enforce standards Engineering discipline solutions * Support Engineering Discipline Design Review * Manage the link with other Engineering disciplines / calling for hierarchical support if needed * Capitalization of the know\-how (Standardization, Specifications, technical reports, processes and guidelines) **Support Engineering discipline requirement Management** * Provides inputs and requirements to the Engineering discipline for the development * Interface with customer for Engineering discipline architecture content * Contribute to refine the functions into the right sub\-systems (system \- mechanical \- software \- hardware …) **Case of System Architect: distribute and spit the functions per Engineering discipline** * Translate system requirements in Engineering disciplines requirements * In collaboration with the different competences (Engineering disciplines) define the functions into the right sub\-systems (system \- mechanical \- software \- hardware …) * Ensure the inter\-operability of all sub\-systems **Job:** R\&D Team Leader/Architect **Organization:** Software Development **Schedule:** Full time **Employee Status:** Regular **Job Type:** **Job Posting Date:** 2025\-10\-14 *Join Us !* *Being part of our team, you will join:* * *one of the largest global innovative companies, with more than 20,000 engineers working in Research \& Development* * *a multi\-cultural environment that values diversity and international collaboration* * *more than 100,000 colleagues in 31 countries... which make a lot of opportunity for career growth* * *a business highly committed to limiting the environmental impact if its activities and ranked by Corporate Knights as the number one company in the automotive sector in terms of sustainable development* *More information on Valeo:* *https://www.valeo.com*

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary

Power Plant Control System Hardware Engineer64151285272065123

Indeed

Power Plant Control System Hardware Engineer

**A Snapshot of Your Day** -------------------------- In this role, you will function as a HW Engineer providing HW engineering design using Siemens Energy Omnivise\-T3000 for Power Generation Equipment and digitalization. On a day\-to\-day basis, HW Engineer spends 80% of their time in the back office on project related activities while the other 20% will be spent onsite supporting installation and commissioning Control system cabinets. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- **How You’ll Make an Impact** * Evaluation of Distributed Control System (DCS) for new and modernization installations, I/O list preparation. * Cabinet Layout and IO channel/ card assignment * Basic and detailed engineering of DCS system Control cabinets. * Heat load calculation for DCS/ PLC cabinets. * Interconnect Drawing between cabinets * Network design and developing the drawing **What You Bring** * Bachelor of Science from an accredited university in Engineering or related field (Electrical or Electronics or Instrumentation Engineering). * 7\+ years’ experience in Hardware design engineering Manufacturing, testing and HW Engineering * Proficient with Siemens Energy DCS \-T3000 and Siemens S7 based system. * Hands on knowledge on AutoCAD Electrical, COMOS, E\-Plan. * A self\-motivated teammate with strong problem\-solving skills. Task oriented with excellent time management; always willing to learn. * Must be fluent in English * Resumes must be submitted in English **About the Team** Our Gas Services division offers Low\-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90\+ countries while ensuring our climate is protected. With \~100,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we’re also using our technology to help protect people and the environment. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150\-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: https://www.siemens\-energy.com/employeevideo **Our Commitment to Diversity** Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, gender identity, sexual orientation or disability. We energize society, all of society, and we do not discriminate based on our differences. **Rewards/Benefits** * Career growth and development opportunities * Supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * Savings Fund * Parental leave and family building benefits https://jobs.siemens\-energy.com/jobs -------------------------------------

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary

Indeed

Senior Engineer

Information Technology R303491 Full time Not Remote Av. 5 de febrero 1351, PB2, Queretaro, QUE 76120 Mexico Create a healthier, brighter future for pets, pet parents and people! If you want to make a real difference, create an exciting career path, feel welcome to be your whole self and nurture your wellbeing, Petco is the place for you. Our core values capture that spirit as we work to improve lives by doing what’s right for pets, people and our planet.* We love all pets like our own * We’re the future of the pet industry * We’re here to improve lives * We drive outstanding results together * We’re welcome as we are Petco is a category\-defining health and wellness company focused on improving the lives of pets, pet parents and Petco partners. We are 29,000 strong and operate 1,500\+ pet care centers in the U.S., Mexico and Puerto Rico, including 250\+ Vetco Total Care hospitals, hundreds of preventive care clinics and eight distribution centers. We’re focused on purpose\-driven work, and strongly believe what’s good for pets, people and our planet is good for Petco.**Duties \& Responsibilities:** ------------------------------- * **Has a long term vision in terms of business value to the customer, has the ability to understand and drive the problems that must be solved for the final goal to be realized** --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * **Superior understanding of concepts and tools, able how to them, recommends and drives concepts and tools** ------------------------------------------------------------------------------------------------------------ * **Owns functional area/feature(s) development/implementation, design, solution, arch., etc.** --------------------------------------------------------------------------------------------- * **Able to take on the most complex tasks and problem solving efforts** ---------------------------------------------------------------------- * **Deep understanding across business domains, thinks in terms of the whole business** ------------------------------------------------------------------------------------- * **Has system and business domain oversight** -------------------------------------------- * **IDs, collects, and provide analysis of data and can match to user need** -------------------------------------------------------------------------- * **Conducts software and hardware requirements reviews, preliminary and critical design reviews, and software acceptance reviews** --------------------------------------------------------------------------------------------------------------------------------- * **Ensures objectives are being met by evaluating the ongoing effectiveness of current plans, programs, and initiatives; consulting with business partners, managers, co\-workers, or other key stakeholders; soliciting, evaluating, and ing suggestions for improving efficiency and cost\-effectiveness** ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- **Key distinction of job level:** --------------------------------- **Works independently, provides guidance, people seek for answers** ------------------------------------------------------------------- **Type of supervision received:** --------------------------------- **Will operate with minimal instruction** ----------------------------------------- **Type of supervision given:** ------------------------------ **None** -------- **Minimum qualifications:** --------------------------- * **Bachelor’s of Computer Science or similar** --------------------------------------------- * **5\-8 years of experience** ---------------------------- * **Analytical skills \- understanding for application/implementation** --------------------------------------------------------------------- * **Full understanding of concepts and tools, able to them** ---------------------------------------------------------- * **Ability to express written \& verbal thoughts to others in the technical field** ---------------------------------------------------------------------------------- * **Experience allows them to understand and contribute to immediate outcomes** ----------------------------------------------------------------------------- For a more detailed overview of Petco Total Rewards, including health and financial benefits, 401K, incentives, and PTO \- see https://careers.petco.com/us/en/key\-benefits Petco Animal Supplies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or any other protected classification.

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary

Materials Application Lead Engineer (E3)64151284716417125

Indeed

Materials Application Lead Engineer (E3)

**Job Description Summary** =========================== Materials Application Lead Engineer (E3\) provides leadership and accountability of functional and business objectives that require integration across different organizations. Additionally, resolves and serves as a consulting resource for materials complex issues by interacting and influencing different organization leadership levels, either technically or administrative. Structures and organized resources to execute on business goals/objectives, communicating assertively to leadership.**Job Description** =================== **Roles and Responsibilities** * Coach and mentor others in the analysis, design, test and/or integration related to assigned components, assemblies or process systems that meet business standards, practices, and procedures, and meet the product/program requirements. * Work within the guidelines of applicable GE Policies and Procedures, Engineering Standards, Design Customer Operating Procedures, Specifications, Government and Commercial Standards, and special security requirements. * Provide technical leadership to other personnel and assigned teams, mentor others in the organization. * Assure that proper documentation of technical data generated for the assigned projects and/or tasks is consistent with engineering policies and procedures. * Monitor and communicate project status, business issues, and significant developments. Participate as a presenter or reviewer in technical and program reviews. * Lead the solution of complex technical problems. * Utilize Lean tools to improve current business products and processes. Document successful Lean projects * Lead multiple projects, monitoring progress and quality and ensuring schedule requirements are met. * Check own and other people’s work. * Recognized technical expert in Materials Science Engineering. * Lead the implementation of innovative analysis, designs, development concepts, processes, and system solutions. * Define technical schedule cost and/or program requirements. * Conduct assessments and develop action plans to anticipate and respond to problems. * Effectively communicate and provide recommendations to internal and external GE customers through the analysis, preparation, and presentation of technical data. * Provide the engineering technical support to cross functional teams to improve or resolve design, performance, manufacturing, supplier, or field issues. **Required Qualifications** * Bachelor associated to Materials Engineering or Metallurgy. * Recognized technical expert and leader in materials engineering. * Demonstrated proficiency in materials and processes issues resolution with a systemic view (technical, hardware, system, business, functions, and people). * Demonstrated leading skills at a global level (global initiative lead or associated global responsibility). * Demonstrated competency on topics associated to different Superalloys, manufacturing and joining processes. * Experience in different processes for manufacturing of parts (welds, coatings, joining methods, additive, forgings, and castings. * Proven experience on establishing and developing testing plans for determining materials capabilities. * Fluent in English for conversations and writing. **Desired Characteristics** * Knowledgeable failure analysis in common failure mechanisms in turbomachinery components resulting from manufacturing, testing or field operation being able to interpretate metallurgical investigation reports towards root cause determination. * Knowledgeable of Repair and Advanced Repair Technologies such as inspection, joining, specialized welding, cleaning coating, advanced materials, and metal addition. * Clear, strategic, and critical thinker; proven experience in translating strategies into actionable plans. * Proven ability to prioritize, plan and execute important business initiatives. **Additional Information** ========================== **Relocation Assistance Provided:** No

C. Damián Carmona 10, Centro, 76020 Santiago de Querétaro, Qro., Mexico

Negotiable Salary