**Metrology Specialist Engineer\- Querétaro** **Who we are?** We are a leading company in technological solutions for instrumentation in measurement, control and industrial automation, offering reliable, accurate and high-quality solutions. We always seek the highest and fastest return on investment for our customers. We are certified in the Integrated Management System, with ISO 9001:2015, 14001:2015 and 45000:2018 standards. Mytec Automation International, S.A. de C.V., since 2006, has been a highly reliable partner in the market of various industries: Food and Beverage Life Sciences (Pharmaceutical and Personal Care) Oil and Gas Chemical and Petrochemical Drinking Water and Wastewater Power Generation Automotive and Aerospace Heavy and Primary Industry (Steel, cement, lime, gypsum) Pulp and Paper Plastics Our passion is to offer an extraordinary experience to our customers through high-tech platforms, continuous improvement processes, innovation and professional development of our employees. In an era of profound and rapid changes, our customers benefit from value propositions and high satisfaction. Thus, our products, services and solutions strongly contribute to social, economic and technological development. We are specialists in metrology and calibration services, focusing on precision, technical reliability and regulatory compliance. Our commitment is to provide high-quality services in laboratories accredited under the NMX\-EC\-17025 standard, with a special focus on liquid flow, pressure and temperature measurements, as well as other industrial process variables (level, density, viscosity, velocity, light intensity, etc.), complying with national and international standards. **What are we looking for?** We are seeking engineers with proven experience in Metrology Technical Services in flow, pressure and temperature variables, and other industrial process variables (level, density, viscosity, velocity, light intensity, etc.). Start date: **Q3\-2025** **Job objectives** Perform calibrations, verifications and preventive/corrective maintenance on flow, pressure and temperature measurement instruments, and other industrial process variables (level, density, viscosity, velocity, light intensity, etc.), both in laboratory and field environments. Participate in the preparation of certificates according to NMX\-EC\-17025, collaborate in improving metrological processes, and ensure traceability, accuracy and quality of the services provided. **Main requirements:** **Education:** * Engineering degree (graduated, preferably, or near graduation) in Metrology, Electronics, Mechatronics, Chemistry, Control and Automation, Instrumentation, Physics-Mathematics or related fields. **Professional experience:** * Minimum 2 to 3 years of specific experience in calibration of instrumentation for **flow**, **pressure** and **temperature**, and other industrial process variables (level, density, viscosity, velocity, light intensity, etc.). * Desirable experience as a signatory or holding signatory authority. **Essential knowledge:** * Calibration methods by volumetric transfer (gravimetric, volumetric). * Estimation and calculation of measurement uncertainty according to GUM. * Interpretation and application of the NMX\-EC\-17025 standard and associated technical documentation. * Applicable national regulations for volumetric control (NOMs, CRE, ASEA, etc.). * Operation of **Flow Calibration Skid** (skill will be evaluated). * Operation and knowledge in handling **Digital Pressure Gauges** for pressure measurement (skill will be evaluated). * Application and proficient use of **Temperature Baths** (skill will be evaluated). * Industrial flow instrumentation: electromagnetic, ultrasonic, coriolis, turbine, among others. As well as pressure and temperature measurement instruments, and other industrial process variables (level, density, viscosity, velocity, light intensity, etc.). * Industrial communication protocols: HART, MODBUS, Ethernet, EtherCAT, 4\-20 mA and 3\-15 psi signals, etc. * Intermediate/advanced Excel and data acquisition software. * Technical English (reading and interpretation of manuals). **Skills and competencies:** * Attention to detail and manual precision. * Field technical problem-solving. * Clear and structured technical writing. * Commitment, proactivity and decision-making. * Teamwork, effective communication and service attitude. * Adaptability, responsibility and willingness to continuously learn. * Ability to drive manual transmission vehicles and valid Class B driver's license. **Main responsibilities:** * Perform calibrations of liquid flow, pressure and temperature meters, and other industrial process variables, both in the field and laboratory. * Prepare and review technical certificates and reports according to internal procedures and the 17025 standard. * Perform preventive maintenance on flow, pressure and temperature reference standards and instruments, and other industrial process variables (level, density, viscosity, velocity, light intensity, etc.). * Comply with industrial safety protocols during interventions. * Transport, safeguard and operate reference equipment properly. * Detect and report technical deviations in own and customer equipment. * Support documentation, administrative tasks and laboratory continuous improvement activities. **Additional requirements:** * Valid **driver's license** Class B. * Experience driving vans or trucks up to 3\.5 tons (or larger). * Availability to travel within the country (**70% of working time**). Travel abroad if necessary. * Ability to perform moderate physical work (handling standards, assembling calibration systems, etc.). * Must **reside in Querétaro** **Our offer:** * Competitive salary and benefits package based on academic background, years of experience and demonstrable skills. * Opportunities for career growth within the company. * Continuous training. **Your input:** We would greatly appreciate it if, in addition to your resume, you could tell us a little about yourself before a potential initial interview. Job type: Full-time Salary: $22,000\.00 \- $25,000\.00 per month Benefits: * Free parking * Free uniforms Application questions: * How many years of experience do you have operating a Flow Calibration Skid? * Have you worked in Calibration Service Laboratories? If YES, please specify which ones. * In which processes have you used Temperature Baths? * What models or brands of temperature pressure gauges have you used? * In which area of Querétaro city do you currently live? License/Certification: * Driving (Mandatory) Travel availability: * 75 % (Mandatory) Work location: On-site Expected start date: 08/15/2025